Open topic with navigation

Enter Spectra NAS Storage Location Information

IMPORTANT 

The StorCycle solution requires that a Spectra NAS system be running BlackPearl or Verde version 5.1.2 or later.

If you select the Spectra NAS storage type for a Spectra BlackPearl NAS or Verde system, the dialog box updates to display the following fields:

Figure 46 The New Storage Location Spectra NAS Device dialog box.
1. For Storage Location Type, select whether the storage location will act as a Source or a Target.
2. Click Next. The Spectra NAS Storage Location Details dialog box displays.

Figure 47 The New Storage Location Spectra NAS Details dialog box 9target shown).
3. Enter the IP address or hostname for the Spectra NAS Management Port. Include http://.
Note: The Spectra NAS Management Port, and Spectra NAS Username and Password are used to authenticate that this is Spectra NAS for licensing purposes. See Licensing for more information.
4. Enter the Username of a user with Login user access as well as Monitor and/or Administrator user access, or if the Spectra NAS system has Active Directory configured, an Active Directory administrator.
5. Enter the Password associated with the username entered above.
6. Enter the file system Server Path to the NAS mount point (\\server\path or full UNIX path /mnt/point).

IMPORTANT 

Storage location source paths should not overlap. For example:

• The storage location server path should not be a sub-directory of an existing storage location path.
• The storage location server path should not have as a sub-directory an existing storage location path.
• The storage location server path cannot be the same as an existing storage location path with different capitalization.
7. For a target storage location, if desired, select the Retention Policy check box and enter or select the desired number of days to retain files on this storage location before the StorCycle solution automatically deletes the files for compliance or capacity recovery. Clear the Retention Policy check box to keep files permanently. See Retention Policy Best Practices for more information.
Note: Retention policies are only supported for data center and enterprise licenses. See Licensing for more information.
8. If desired, select the Encrypt Target check box to encrypt data sent to this target location. Clear the Encrypt Target check box if you do not want data sent to the target encrypted. See Enable Encryption for more information.
Note: Only Crypto Officer users can enable encryption.
9. Use the drop-down menu to select either:

If you selected Do Not Limit Transfer During Peak Hours, continue with Test and Submit the Storage Location.

When you selected Limit Transfer During Peak Hours, the configuration options for limiting transfer display.

Note: Limiting transfer during peak hours only applies when reading from the storage location. If the Storage Location Type is Source, this occurs when the location is scanned or is the source of a migrate / store project. If the Storage Location Type is Target, this occurs when a restore is done of a file previously migrated / stored to the target.

Figure 48 The Limit Transfer During Peak Hours configuration settings.
a. Enter the Peak Hours Bandwidth. The default is 40 MiB/s. Spectra Logic recommends starting with 10% of peak load and then adjust as necessary by editing the storage location.
b. Enter the maximum Scan Objects per Second during peak hours. The default is 750.
c. Select a day of the week for which you want to designate peak hours. The default peak hour selection of 07:00-18:00 (7:00 AM - 6:00 PM) displays. Select and move a handle to change the start and end times. Repeat this step for other days as necessary.
Note: The time range is in Coordinated Universal Time (UTC), not local time.
d. Use the drop-down menu to select either Do Not Limit Transfer During Off-Peak Hours, or Limit Transfer During Off-Peak Hours.

If you selected Do Not Limit Transfer During Off-Peak Hours, continue with Test and Submit the Storage Location.

When you selected Limit Transfer During Off-Peak Hours, the configuration options for limiting transfer display.

Note: Limiting transfer during off-peak hours only applies when reading from the storage location. If the Storage Location Type is Source, this occurs when the location is scanned or is the source of a migrate / store project. If the Storage Location Type is Target, this occurs when a restore is done of a file previously migrated / stored to the target.

Figure 49 The Limit Transfer During Off-Peak Hours configuration settings.
i. Enter the Off-Peak Bandwidth. The default is 400 MiB/s. Spectra Logic recommends starting with 100% of peak load and then adjust as necessary by editing the storage location.
ii. Enter the maximum Scan Objects per Second during off-peak hours. The default is 3000.

Test and Submit the Storage Location

1. Click Test Location to verify that the server can connect to the storage location. If the StorCycle solution does not return a check mark indicating it can communicate with the storage location, you must resolve the error before submitting the location.
2. Click Submit to save the project. to save the storage location.
3. If necessary, repeat these steps, starting with Step 2 in Configuring Storage to configure additional storage locations.